Instruction Manual

CONTROL FEATURES
POWER SWITCH – Toggle switch to “ON” to energize the control. Turning the switch to “OFF” will power
down the control and cancel any menu.
MENU BUTTONS – Pressing any of the menu buttons will cause the red circle next to the corresponding
button to illuminate. Once the lid is closed; the sandwich press will run the selected program.
DISPLAY AREA – This area will display temperatures, menu time, and error codes.
HOLD/CANCEL – This button is pressed to cancel a menu before it is finished (this function is disabled for
certain customers).
Description of error messages
Error Code
Description
Possible Cause
Err1
No menu file is loaded
A menu file was never loaded.
Err2
Incompatible menu file
Menu file isn’t saved as a .csv file or
the formatting is wrong within the file.
Err3
Preheat temperature is out of range
The preheat temperature is greater
than 500°F.
Err4
Menu temperature is out of range
The menu temperature is greater than
500°F.
Err5
The number of stages in a menu is
greater than 15
Too many menu stages.
Err6
A single stage time is greater than 3599
seconds (59min 59s)
A stage time is greater than 1 hour.
Err7
Illegal microwave setting.
One or more of the stages has a
microwave setting that is something
other than “On” or “Off”.
Err8
Sum of stage times programmed for a
menu item is greater than 3599 seconds
The sum of stage times is greater than
1 hour.
Err9
Corrupted menu data in non-volatile
memory
Problem with the control, not the
menu file.
Prob
Either or both temperature probes are
open or not connected
A thermocouple wire has broken or
disconnected.