User guide
Fillo™ and Pillowtop™ Care Tips
After each trip, make sure to air dry your Fillo™/ Pilllowtop™ for at least 24 hours before
storing to prevent mold/mildew from forming.
Avoid storing your Fillo™ / Pillowtop™ compressed for extended periods of time in its
stu sack. Over time, tightly compressed foam can lose its ability to rebound, If possible,
keep the product stored at or otherwise, loosely rolled, uncompressed, and away from
direct sunlight. Do not store the pillow inated.
storing
When washing the pillow, wash only the microsuede cover. Remove the inner air bladder
and memory foam/mesh bag assembly. Untie the elastic cord on the exterior of the
cover so that it cannot snag on the washer or dryer.
When washing the Pillowtop™, wash only the microsuede cover. Remove the sleeping
pad(s), and the comfort foam/mesh bag assembly.
Front-loading, oversized washers are best. Try to avoid lower volume home washing
machines that can compress, twist, or rip the fabrics. Use warm water and choose a
regular cycle with no bleach or fabric softener. We recommend the use of ReviveX®
Synthetic Fabric Cleaner to gently remove dirt and oils.
If the foam must be washed, hand wash only. Do not wring dry to preserve the position
of the foam within the mesh. Pat dry with an absorbent towel.
machine washing
Take care transferring the wet cover from the washer to the dryer; ne bers and
stitching are more susceptible to breakage when wet. For best results, choose an
oversized commerical dryer and tumble dry on low. Alternately, hang until completely
dry; turn the cover inside out and hang dry until no moisture is present.
drying