User Manual

1
2
3
4
5
6
7
8
9
11
10
1. Side Guyout/Vent
2. Rear Door and Vestibule
3. Reinforced Pole Pocket
4. Upper Vent
5. Vestibule
6. Vestibule Anchor
7. Tensioning Cord Sack
8. Webbing Strap
9. Oversized Pole Grommet
10. Mesh Door
11. Adjustable Corner Anchor
META™ 2P Innovations
1. Easy Setup: Smart design and straightforward
functionality make the setup of Meta™ 2P a cinch.
Simply stake out each of Meta™ 2P’s anchor points
and insert/expand your trekking poles until the tent
is properly tensioned. Oversized grommets locate
the tips of your trekking poles and reinforced areas
at the top of the tent receive the pole handles. A
total of eight anchor points keep Meta™ 2P nailed to
the ground, vented, and ready to face all conditions.
2. Venting: A combination of venting options in
Meta™ 2P help combat condensation and promote
good air circulation. Head and foot vents can be
deployed by staking out the reflective guy-out cord
at the side of the tent. Reinforced hoops keeps the
upper vents open at all times, allowing low-to-high
ventilation. The upper vent construction is fully
seam taped and stays waterproof in all weather.
Even when the vestibules are fully closed, strategic
catenary cuts allow air movement under the
vestibule and into the tent.
3. Dual Vestibule/Entries: Two doors and two
vestibules eliminate jostling for position and
gear storage.