User Manual

Inflate Base Layer
Adjust Firmness
With both valves closed, lay on the pad to test the comfort. Add or release air from the
top layer to adjust the firmness of the pad. Leave the base layer firmly inflated for
maximum protection from rocks and roots.
Open Valves
Open both valves on your Tuo™ sleeping pad and lay it out flat. The longer you leave
the pad with its valves open, the more it will partially self-inflate.
Packing Away
To deflate, open the valves and roll out as much air as possible. Then close both valves,
unroll the pad and roll pad again, opening valves again as you finish rolling. Close the
valves once air has escaped, and insert the pad into its stuff sack.
Repair
To repair a small leak in your pad using your included repair kit, clean and dry damaged
area. Adhere one of the fabric patches to pad using adhesive. Note that submerging
the inflated pad in water can help locate leaks.
Using your mouth or the Disco™ Pump, inflate the base layer of the Tuo™ pad until
it becomes difficult to add more air. Twist both valves closed.
Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.
To contact NEMO Customer Service
Email: [e-mail]
Phone: [phone]
©2011 NEMO Equipment, Inc.
TUO
™
SERIES
1
2
3
4
5
®
INSTRUCTIONS FOR SETUP