Safety Instructions

THE GUIDELINE FOR LED FLEX LIGHT MOTIF
Model No.: LED(SNOW)-XM-MS0039-7FT
Input Rating: 120V AC, 60Hz, Output Rating: 29V DC, 0.162A
IMPORTANT SAFETY INSTRUCTIONS
A) READ AN
D FOLLOW ALL SAFETY
INSTRUCTIONS
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products
are used in outdoor applications, connect the product to a Ground Fault Circuit interrupting (GFCI) outlet.
If one is not provided, contact a qualified electrician for proper installation.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let lamps rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, when retiring for the night, or if left unattended.
h) This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it
should not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l) Do not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with non-replaceable lamps. Do not twist lamps. And if non-replaceable lamps
burn out or damaged, do not try to repair or replace it, it shall be discarded.
n) Read and follow all instructions that are on the product or provided with the product.
WARNING: When using outdoor use portable lighting products, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury, including the
following:
READ ALL INSTRUCTIONS
(a) Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuits or outlet to be
used for the outdoor use flexible lighting product. Receptacles are available having built-in GFCI
protection for this measure of safety.
HOW TO ASSEMBLE THE TREE
HOW TO ASSEMBLE THE TREE
（ 1） （ 2） （ 3）
1. Open the Base (C). Attach the Center
2. Place the plastic cap of the Tree boody
3. Place the Star on top of the assembled
4. If you are using this tree as an outdoor
Poles (B) together to create one prop
assembly, and insert the assembled prop
(A) onto the top of the assembled prop
(B) and allow the Tree body to stretch
towards the ground, creating appearance
tree. secure the tree body by ubber bands
to the hooks along the end of the Base (C).
decoration, use the provided Ground stakes
(D) to secure the tree to the ground.
into the Base (C).
of tree.
-Z