User Guide

[NOTE] Simply exclude the device if you had included it prior to installing the new device
handler. Then add the device to your SmartThings hub by clicking on Add thing > +
Connect New Device in your app. Press and release the Z-Wave button on the sensor
third quickly.
Remember to keep the device within 3 feet away from your hub during inclusion — the
device should be automatically discovered as the NEO Coolcam Siren Alarm. Then, leave
the sensor by the hub for a few hours so it can fully configure. At the same time, please
note that you are using SmartThings Classic APP, the SmartThings new APP is not
fully support all functions of the motion sensor.
If the sensor cannot be automatically discovered as the correct option, please refer to
step 5.