User manual

Speaker Setup
START TO USE THIS PLAYER
AUDIO SETUP
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
If you only need 2 channels to enjoy music, it is
recommended to select Stereo option. When you use
this players built-in Dolby Digital decoder to play 5.1
channel sound, please select off.
To select speaker size. You can select Large or big size
speaker, Small for small size speaker. You can turn off
the Center/Rear speaker when you choose off
Optional settings: Large, Small, Off.
You can turn on/off the sub woofer speaker.
Optional settings: On, Off
To play test tone to test each speaker connect to the
player. Optional settings: On, Off
This function is to adjust the volume of dialog in the playing
material. ( Only available when you choose Downmix to
2 channels option. Optional settings: On, Off
This option is for compress audio signal with wide dynamic
range proportionally to reduce intense impact to speakers.
Optional settings: On, Off
You dont need do anything in speaker setup when you
are using digital audio output ( optical / coaxial ). This is
for user who are using this players built-in 5.1 channel
output function.
SPDIF Setup
Spdif output
This option is from users who are using digital audio
output ( optical / coaxial ).
This is for choosing the digital audio format from
optical/coaxial output. If you are using an ampfilier with
built-in Dolby/DTS decoder, please choose SPDIF/RAW.
Optional settings: SPDIF OFF, SPDIF/RAW, SPDIF/PCM,
Manual.
-11-