User's Manual

9.
Proper writing method
Neo smartpen N2’s usage degree
The recognition quality is heavily affected by the direction of the optical sensor’s shooting angle.
Deviating from the appropriate degree, or holding the pen in the wrong direction could cause difculties.
Proper holding
When holding the pen, place the
pen’s tip upward. When writing,
check the holding position.
+40
°
-20
°
O
+40
°
-20
°
Hold the pen that does
not cause pressure to the
wrist and maintain a natural
writing angle.
Neo smartpen N2 Acceptable recognition degree
+40
°
-20
°
Inappropriate holding
If the holding position is not
proper, the device will not
operate properly.
+40
°
-20
°
X
Product’s acceptable
recognition angle is
-20° ~ +40°.
(90° vertical standard)
The product contains an optical sensor. The recognition quality can decrease under direct sunlight and/or infrared rays.
Please do not cover the optical sensor by fingers or etc.. The writing content could not be recognized.
How to change the pen tip
1. An empty pen tip can be easily replaced.
2. The refillable pen tip can be purchased at ‘Neo smartpen N2’ stores.
3. The pen tip can be purchased at ‘Neo smartpen N2’ stores or packages. The pen tip is compatible only with Neo smartpen N2,
and upon inserting other pen tips that are not designed or compatible with Neo smartpen N2 could cause further damage(s).
Hold the end of the pen tip and
pull out the opposite direction.
+40°
-20°
1.
Insert the new tip into the
proper hole.
+40°
-20°
2.
After aligning the direction,
carefully push to the end.
+40°
-20°
3.
Hereby, NeoLAB Convergence Declares that this NWP-F110 is in compliance with the essential requirements
and other relevant provisions of directive 1999/5/EC.