This instruction is applicable to all the following models and related extended products NMPRO-WMB2 Tilt arms NMPRO-WMB3 Tilt arms NMPRO-WMB4 Tilt arms Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation. This products should only be installed by someone who has a basic knowledge of building constructio installations and fully undestnd these instrudtions.
Parts list (NMPRO-WMB2) A1 A2 A3 A4 B1 B2 B3 B4 B5 B6 M5X15 M6X15 M8X15 Ø6XØ6.2X1.5 M8X12 Ø6XØ8.2X1.5 M8 Lag bolt Lag bolt 3mm 5mm X4 X4 X4 X4 X4 X6 X2 X2 X2 D1 X2 D2 X2 X4 D3 1000mm*1+480mm*2 X1 X1 D4 X8 D5 X2 X2 Parts list (NMPRO-WMB3) A1 A2 A3 A4 B1 B2 B3 B4 B5 B6 M5X15 M6X15 M8X15 Ø6XØ6.2X1.5 M8X12 Ø6XØ8.2X1.
Installation 1 2 D2 D3 B3 3 D4 1000mm 3mm 480mm 1000mm D4 Lock on D3 B3 4 D4 UP 4
B2 B1 B3 B2 B1 5mm 6 480mm 1000mm NMPRO-WMB2 480mm 1000mm 1000mm NMPRO-WMB3 480mm 1000mm 1000mm 1000mm 1000mm NMPRO-WMB4 1000mm 5 480mm
7 BRICK OR CONCRETE B5 B2 B4 WOOD B2 B4 8 Installing the Mounting Brackets After you have mounted the first bracket as described, draw a horizontal line (the use of a laser leveller may help). Alignment line Alignment line You can place the second bracket by tape measure proceed in this way with the other brackets.
9 10 A4 A1/A2/A3 11 Wire Height adjustment 10mm 12 15° 10° 5° 10 15 10 10 0 15 15 0 0 5 -6° 7 5 5
