Operation Manual

39
18.0 GPRS and MMS settings
You get the settings for GPRS and MMS from your operator. At your operator’s website you can get the settings sent to
you by SMS. Follow the operator’s instructions of how to send the settings to your Neonode using automated
configuration SMS’s. Make an Accept sweep to accept the settings when you receive the SMS.
When you are going to choose configuration for your mobile device, Neonode might not be listed. You can then choose
another new mobile model. The settings for most new models will work on your Neonode.
If you have tried the automated configuration SMS, but the settings for some reason don’t work, you can enter them
manually.
You will find all the information you need to enter the settings manually at your operator’s website. The manual settings
information is often found in connection to the automated settings you can send to your Neonode using configuration
SMS's.
18.1 Enter settings manually
18.2 Settings for GPRS
Open the tools menu from the status screen. Then tap on the
Communication icon.
Choose and tap GPRS… This will take you to the GPRS Access Points
and Application Profiles.
In the GPRS Access Points view you open the tools menu and tap the
icon Add.
To enter information you mark an item and tap on the screen. Enter the
information needed and make an Accept sweep to save. Mark the next
item and repeat the procedure.
GPRS Access Points
Enter the information needed, as described below.
Name: Enter a name of your choice.
APN: This information you get from your operator’s website.
Username: Not needed.
Password: Not needed.
Statistics: Not needed.
Make an Accept sweep when you have entered all information needed.
Now you should create an application profile and connect it to the access point. Make a Change view sweep to get to the
Application Profiles. Open the tools menu and tap the icon Add Application Profile.
Application Profile GPRS
Enter the information needed, as described below.
Type: choose WWW.
Access Point: Choose the access point you just created.
URL: Not needed.
Use as HTTP Proxy: This information you get from your operator’s website.
Proxy: Not needed.
Port: Not needed.
Make an Accept sweep when you have entered all information needed. The settings for GPRS are
now done and you can start surfing the net with your Neonode.
18.3 Settings for MMS