Operation Manual

41
Tap to move the item selected. Move this item to a new position by
holding your finger on it and drag it to the desired place, or tap to abort.
When you move an item, you tap to confirm the new position.
The moved icon will change place with the icon that was originally in
that position.
19.2 Multi part call function
The N2 has a multi part call function. Please
observe that the subscription with your
operator must include this service. You must
also set the “call waiting” status to Active.
To do that you go to the tools menu and tap
on the communication icon, then choose
telephony and call waiting. Mark the Active
setting and tap the screen to activate it.
When you are talking on the telephone and
you receive another call, you can accept that
call and talk to two or three persons at the
same time. You do like this: answer the
second call and open the tools menu. Tap on
the icon “Connect all”. You can now talk to
two persons at the same time.
If you get two calls and don’t want to use the
multi part call function, you can just switch
between the first and second call by making a
sweep to the person you want to talk to. The highlighted call will become active and the other will be on hold.