Operation Manual

5
To insert the SD-card, first remove the rear cover as shown above, and then insert the SD-card with the text facing
upwards. Make sure it is correctly inserted.
To remove the SD-card you do the opposite of inserting it. Turn the device off, remove the rear cover then remove the sd-
card.
1.4 Charge the battery
Before you charge the battery for the first time, you must remove the protective tape over the battery connectors.
There are two different ways to charge the battery:
1. Use the enclosed charger. To charge the battery, you insert the charger in the device’s USB -port and connect it to a
wall socket.
2. Connect the mobile to a computer with the enclosed USB cable. The mobile will charge while connected to the
computer.
1.5 Turn the device on
To turn the device on you press the on/off button . It is situated on the left side of the device, just below the + and -
button.
Press the on/off button for about two seconds. Release the button when the device starts to boot up.