Product Brochure

7
Specialty Aerators
1.2 gpm Household Kit
4 - Regular Aerator Inserts;
8 - Regular Washers (4 male &
4 female); 1 - Aerator Wrench
1 pack- Store SKU 1001533901
1 pack- Online SKU 206275146
1.5 gpm Household Kit
4 - Regular Aerator Inserts;
8 - Regular Washers (4 male &
4 female); 1 - Aerator Wrench
1 pack- Store SKU 705951
1 pack- Online SKU 100665999
1.2 gpm Water Saving Value Pack
1 - Double Swivel;
2 - Dual Thread Aerators
1 pack- Online SKU 206592425
1.5 gpm Water Saving Value Pack
1 - Double Swivel;
2 - Dual Thread Aerators
1 pack- Store SKU 741372
1 pack- Online SKU 202542919
Instructions
Insert installation:
1. Unthread old aerator from faucet and remove
washer and insert.
2. Place new aerator insert into the original housing.
3. For housings with inside threads, use thinner
washer. For housings with outside threads, use
thicker washer.
4. Install onto spout by hand. If leak occurs, tighten
more firmly.
Male or Female installation:
1. Unthread old aerator from faucet.
2. Install onto spout by hand. If leak occurs, tighten
more firmly.
1. Remove showerhead.
2. Apply plumber’s tape to threads.
3. Install adapter onto spout by
hand. Reconnect showerhead.
4. Turn on shower. If leak occurs,
tighten more firmly.
Shower Flow Controller installation:
Dual thread installation:
1. Unthread old aerator from faucet.
2. For housings with inside threads, use thinner
washer. For housings with outside threads, use
thicker washer.
3. Install onto spout by hand. If leak occurs, tighten
more firmly.
Caché
®
installation:
1. Use key to remove hidden aerator from spout.
2. Clean threads inside spout.
3. Use key to install the new hidden aerator.
4. Turn on faucet. If leak occurs, tighten more
firmly.
Tip: Save your key for future use.
NEOPERL
®
products meet
all the requirements for
non-toxicity developed and
recognized at the national
level by NSF International
for public health and safety.
NEOPERL
®
products are
tested and listed directly at
NSF's labs.
Certified to
NSF/ANSI/CAN 61: Q ≤ 0.5
Certified to
NSF/ANSI/CAN 61: Q ≤ 0.5