User Manual

98 NeoPoint 1600 User’s Guide

System Recommendations and Requirements

Setting Up Your NeoPoint Modem

If your NeoPoint phone has already been configured for use as a wireless

modem, skip to the next section. If your NeoPoint phone has not been setup for

use as a wireless modem, perform the following:

1. Insert your SoftSync cable serial port connector into your PC serial port.

2. Insert the SoftSync cable phone connector into your NeoPoint phone.

3. Power ON your NeoPoint phone.

NOTE: Ensure that the Sync option on your NeoPoint phone is set to

Manual (not Automatic). For more information on setting your Sync

option refer to “Setting Sync to Manual or Automatic” on page 71.

4. From your PC, click on the Windows START button.

5. Select SETTINGS.

6. Open CONTROL PANEL.

7. Open MODEMS.

8. Click on ADD... from Modems Properties window.

NOTE:For Windows 95 users, the next step requires you specify

modem type - select Other (not PCMCIA card).

9. Select “Don't detect my modem; I will select it from a list.”

Windows NT, 95, or

Windows 98 is recommended for best performance

NeoPoint-compatible

modem program

For the latest list of NeoPoint-compatible modem

programs, visit www.neopoint.com/products/

products.shtml and see the links under Compatible

Software.

IBM-compatible PC

486-class or faster

NeoPoint Hardware NeoPoint Phone & SoftSync Cable