User Manual

100 NeoPoint 1600 User’s Guide
A
you need assistance. The procedures for using Dial-Up Networking differ, depending
on the version of Windows you are running. Follow the instructions for your
operating system.
Using Windows 95/98
If you have previously used Dial-Up Networking with another modem under
Windows 95 or 98:
1. Launch the Dial-Up Networking application.
2. Select the existing Dial-Up Networking configuration.
3. Right click your mouse and select Properties.
4. Select the NeoPoint 1600 (standard 19200) modem then click OK.
If you have never used Dial-Up Networking previously with another modem,
you need to create a new connection in Windows 95/98.
1. Click Start, then select Programs, Accessories and Dial-Up Networking.
2. Double click on Make a New Connection.
3. Enter the connection name.
4. Choose Standard 19200 Modem from the Select a Modem list (Select a
Device in Windows 98).
5. Click Next.
6. Enter the area code, telephone number and country code for the number you
wish to dial.
7. Click Next.
8. Click Finish to complete the connection.
Using Windows NT
If you have previously used Dial-Up Networking with another modem under
Windows NT, you need to select the NeoPoint 1600 modem.
1. Run Dial-Up Networking.
2. Click More on the Dial-Up Networking menu and select Edit Entry and
Modem Properties.