User Manual

Appendix A: Using Your NeoPoint Phone as a Modem
NeoPoint 1600 User’s Guide 105
Table 2: Basic S-Registers
Command Value Description
S0 0 (default)
[1-255]
Disable automatic answering.
[Enable automatic answering after (Value-
1) x 6 seconds.]
S6 2-10
2 (default)
Pause before blind dialing.
S7 1-255
50 (default)
Number of seconds to establish end-to-end
data connection.
S8 0-255
2 (default)
Number of seconds to pause when ‘ is
encountered in dial string.
Table 3: Basic Action Commands
Command Description
A/ Re-execute previous command.
A Enter on-line state.
H0 Causes the MT2 to transition from on-line command state to
command state. Use the digit “0” is optional
O0 Causes the MT2 to transition from on-line command state to on-
line state. Use of the digit “0” is optional