User Manual

32 NeoPoint 1600 User’s Guide
2
Key Pad Off, Low, and High
Key Beep
There are two options in Key Beep:
Key Tone Tones or Click
DTMF Length Short or Long
When you are experiencing problems connecting to a number, it may be because the
dual tone modulated frequency (DTMF) length is too short. If the tones are too short
for the system to recognize the tones for the number you are trying to reach, the
number will not connect. This problem is usually experienced when you have a very
weak carrier signal.
Try changing the setting the DTMF length from Short to Long length. This will
lengthen the DTMF tone, allow the system to recognize the tones, and help connect
your call through the cellular network.
Press DONE when finished.
Alerts
There are three features in the Alerts menu. These features allow you set alerts to
notify you of a change, e.g., when you lose or regain carrier service signal. These
features are:
Roam Beep On/Off. This feature alerts you when your service changes to
roaming (out of your normal area).
Service Change On/Off. This feature sounds a tone notifying you when you
lose/regain a service signal to your phone.
MiniBrowser On/Off. This feature sounds an alarm when you receive e-mail
or other MiniBrowser-definable settings. Refer to “Appendix
B: Using the MiniBrowser” on page 107 for more information
regarding MiniBrowser options.
Press Done when finished.
Main Screen
The Main Screen menu has the following settings:
Phone Number On/Off. This feature displays/removes your phone number
from the Main screen.