User Manual

50 NeoPoint 1600 User’s Guide

NOTE:If you press the END key or close the flip with Active Flip On

to terminate a conference call, the connection between the other two

parties will terminate. However, if one of the two parties terminates a

call, it will not affect the connection between you and the remaining

party.

Call Waiting

Call waiting is a feature offered by your carrier service provider. Call waiting occurs

when you receive an incoming call while you are on a call. From the NeoPoint phone,

you will hear a click through the ear piece indicating that you are receiving another

call. To answer this second call or call waiting, use the following procedure:

1. Press SEND to answer the second call. The phone connects to the second party,

placing the first party on hold.

2. Press SEND again to switch to the first call.

3. Press END when finished with the call.

Disabling Call Waiting

Call waiting can be disabled on a per-call basis from your carrier service provider.

This feature allows you to have a conversation with out interruption from other calls.

To disable call waiting, use the following procedure:

1. Select More from the Menu screen.

2. Press Select (Soft Key 1).

3. Select Services.

4. Press Select (Soft Key 1).

5. Select Call Wait Off.

6. Press Select (Soft Key 1).

7. Enter the 10-digit number to be dialed.

8. Press OK (Soft Key 1).

Using Quick Mode

To access quick mode, use the following procedure:

1. Press and hold the Main/Menu key.