User Manual

52 NeoPoint 1600 User’s Guide

phone is restricted from making calls until the lock code/password is entered.

However, you can still receive phone calls while the phone is locked.

NOTE: You may still call a number on your Emergency List even if

the phone is locked. To create an Emergency List, refer to “Creating

and Editing an Emergency List” on page 68.

The phone may also be locked by pressing and holding the END key for 5

seconds.

Unlocking the Phone

1. Press Unlock (Soft Key 1) from the Main screen.

2. Enter the code to unlock the handset.

3. Press OK (Soft Key 1).

Changing the Phone Mode

1. From the Quick Mode screen, use the Navigator key to scroll to Mode.

2. Use the Navigator key to scroll to Normal, Silent or PDA mode.

Normal Sends and receives calls - normal phone operation

Silent Turns off ringer, clicks, key beeps, tones and other sound

generation. Can still receive and place calls.

PDA Allows you to use the PDA/PIM functions of your NeoPoint phone

without transmitting/receiving carrier signals. This allows you to

use your NeoPoint in areas normally prohibited for cellular use -

obey all applicable cellular laws.

3. Press Select (Soft Key 1).

Changing the Incoming Mode

This mode is used to receive different types of calls: voice, data, and fax. For sending

data and fax transmission, you do not need to change the mode, i.e., use voice mode.

The Incoming Mode has the following three options:

Voice Receives calls - normal phone operation

Data In Sets the phone to function as a wireless modem, receive data

transmission, and pass to your computer.