User Manual

64 NeoPoint 1600 User’s Guide
4
Analog Mode
The analog mode option allows you to force your NeoPoint phone to operate in
analog mode, rather than the digital preferred mode. To force your phone into analog
mode, perform the following.
1. Scroll to Preferences from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Security.
4. Press Select (Soft Key 1).
5. Enter your Lock Code.
6. Press Ok (Soft Key 1).
7. Scroll to Analog Mode.
8. Press Force (Soft Key 2).
9. The following prompt will appear, “Analog for 10 min. or until end of next
call.” Press Yes (Soft Key 1).
Key Beep
1. Scroll to Preferences from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Key Beep.
4. Press Select (Soft Key 1).
5. Choose the settings for the following: Key Tone, and DTMF Length.
6. Press Done (Soft Key 1).
Setting the Alerts
1. Scroll to Preferences from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Alerts.
4. Press Select (Soft Key 1).
5. Using the Navigator key, choose On or Off for the following: Roam Beep,
Service Change, or MiniBrowser.