User Manual

68 NeoPoint 1600 User’s Guide
4
Enabling/Disabling your Lock Code
1. From the Security screen and Lock Code option selected, press the Left/Right
Navigator key to enable/disable the lock code.
2. When finished, press Done (Soft Key 1).
Changing Your Lock Code
1. From the Security screen and Lock Code option selected, press Edit
(SoftKey2).
A pop-up window will appear requesting you to enter the new lock code.
2. Enter the new lock code. It will prompt you to re-enter the new lock code.
3. When finished, press Done (Soft Key 1).
Creating and Editing an Emergency List
1. From the Security screen, scroll to Emergency List.
2. Press Edit (Soft Key 2).
3. Enter the emergency phone numbers.
4. Press Done (Soft Key 1).
NOTE:It is recommended that you include the number to your
carrier service provider in your emergency list. This allows you to
make calls to your provider even if your phone is locked, you cannot
remember your password, are experiencing difficulties, etc.
Resetting the Phone to Factory Default Settings
NOTE:This feature will reset your phone to default settings. It is not
recommended to use this option unless you are sure you want to reset
your phone settings. Refer to “Default Settings” on page 69 to view
the settings.
1. Scroll to Preferences from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Security.
4. Press Select (Soft Key 1).
5. Enter the Lock Code.
6. Press OK (Soft Key 1).
7. Scroll to Defaults.