User Manual

Chapter 4: Using Your NeoPoint Phone
NeoPoint 1600 User’s Guide 75
Using Block My CallerID
NOTE:This function is executed on a per call basis. Prepare to enter
the 10-digit phone number that you intend to call at the prompt.
1. Scroll to More from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Services.
4. Press Select (Soft Key 1).
5. Scroll to Block My CallerID.
6. Press Select (Soft Key 1). A pop-up window is displayed.
7. Enter the 10-digit phone number to be dialed.
8. Press OK (Soft Key 1). The call is then placed with your CallerID blocked.
9. Press End (Soft Key 1) to terminate the call.
Forwarding a Call
1. Scroll to More... from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Services.
4. Press Select (Soft Key 1).
5. Use the Navigator key to select Call Forward On.
6. Press Select (Soft Key 1)
7. Enter the 10-digit number where you want calls to be forwarded.
8. Press OK (Soft Key 1) when finished.
Disabling Call Forwarding
1. Scroll to More... from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Services.
4. Press Select (Soft Key 1).
5. Scroll to Call Forward Off.
6. Press Send (Soft Key 1) and the call will connect to your service carrier.