User Manual

76 NeoPoint 1600 User’s Guide
4
7. Once the call has connected, it will last for approximately 4 seconds and then
terminate the call. A pop-up window appears stating that Call Forward has been
turned off. Press OK to clear the message from the screen or wait momentarily
and it will automatically disappear.
Setting Call Timers
1. Scroll to More... from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Call Timers.
4. Press Select (Soft Key 1).
There are two option for setting Call Timers: Start Day and Clear Current Timer.
• To set the Start Day, use the Navigator key to select the day of the month you
want the call timer to begin. Typically, this day of the month should coincide
with your carrier service billing date.
• To clear the Current Timer, press Reset (Soft Key 2).
5. When you have completed your changes to Call Timers, press
Done (SoftKey1).
If you want to exit Call Timers without saving changes, press the BACK key. A
pop-up window appears stating “Save Changes?” Press No (Soft Key 2).