User Manual

Chapter 5: NeoPoint Care and Troubleshooting
NeoPoint 1600 User’s Guide 81
Cannot hear through ear
piece
• Check Incoming Mode is set to Voice (not
Data In or Fax In). Refer to “Changing
the Incoming Mode” on page 52.
• Check ear piece settings in Preferences/
Volume/Ear Piece. Refer to “Changing
the Volume Levels/Setting Phone to
Vibrate Mode” on page 63 .
• If Volume is set correctly, check if ear
hole is clogged. If clogged, clean ear hole
with a cotton swab.
Others cannot hear you Check if voice hole is clogged. If clogged,
clean voice hole with a cotton swab.
Table 5-1 Basic Troubleshooting Techniques (Continued)
Problem Action