User's Guide

Chapter 4: Using Your NeoPoint Phone
NeoPoint 1600 User’s Guide 67
Enabling/Disabling your Lock Code
1. From the Security screen and Lock Code option selected, press the Left/Right
Navigator key to enable/disable the lock code.
2. When finished, press Done (Soft Key 1).
Changing Your Lock Code
1. From the Security screen and Lock Code option selected, press Edit
(Soft Key 2).
A pop-up window will appear requesting you to enter the new lock code.
2. Enter the new lock code. It will prompt you to re-enter the new lock code.
3. When finished, press Done (Soft Key 1).
Analog Mode
The analog mode option allows you to force your NeoPoint phone to operate in
analog mode, rather than the digital preferred mode. To force your phone into analog
mode, perform the following.
1. Scroll to Preferences from the Menu screen.
2. Press Select (Soft Key 1).
3. Scroll to Security.
4. Press Select (Soft Key 1).
5. Enter your Lock Code.
6. Press Ok (Soft Key 1).
7. Scroll to Analog Mode.
8. Press Force (Soft Key 2).
9. The following prompt will appear, “Analog for 10 min. or until end of next
call.” Press Yes (Soft Key 1).
Creating and Editing an Emergency List
1. From the Security screen, scroll to Emergency List.
2. Press Edit (Soft Key 2).
3. Enter the emergency phone numbers.
4. Press Done (Soft Key 1).