User's Manual

6. WIRELESS CHARGE DESIGN REQUIREMENTS
HP reserves the right to modify the design requirements with advance notice.
6.1 WIRELESS DESIGN

Technology: Tri Mode (Qi, PMA, and A4WP Class 2)

Power: Qi & PMA 5W delivered to receiving device;
A4WP Class 2 10W delivered to receiving device.
 X-Y Dimension: 167.2mm x 90.2mm (of charging surface and electronic)

Thickness: As thin as possible.

Cable routing for standalone: Cable recess plug under the body of the module
 Cable routing for AiO stand: Cable will plug to the DC plug at the side of the AiO stand base.
 Firmware update: To maintain the up to date interoperability of the wireless device
Unit need to be able to update FW via Micro USB port.

LED Status: Need to provide LED to show status. Bi-Color (White and Amber)
 Input Power: 12V

Header for LED: 2 or 3 pin header for single color (White)

DC Plug DC Plug down for (Standalone Module)
DC plug with extension cable to the edge of the AiO base.
 Operation temperature: 35 degree C ambient and 10 degree C delta temperature for the
module means 45 degree C max.

ESD: 8 kV contact and 15 kV Air.