User Manual

be installed in the cabinetry where the transmitter is to be installed. Local codes
must be followed and the AC outlet often must be installed by a licensed
electrician.
E. LED INDICATOR
The LED will indicate the current transmitter status.
F. TRANSPORTATION
The greatest risk of physical damage to the transmitter will be between
transmitter installation and fabricated top installation in the facility. Protect the
transmitter during storage and transportation. One option for protecting the
transmitter is to cut a cavity large enough to contain the transmitter in a piece of
stiff foam. This foam can then be taped over the transmitter for protection.
G.REFERENCES
This information is based on technical data that Neosen Energy LLC believes to be reliable, and is intended for use by persons
having technical skill and at their own discretion and risk. Neosen cannot and does not warrant that this information is absolutely
current or accurate, although every effort is made to ensure that it is kept as current and accurate as possible. Because conditions of
use are outside Neosen’s control, Neosen makes no representations or warranties, express or implied, with respect to the information,
or any part thereof, including any warranties of title, non-infringement of copyright or patent rights of others, merchantability, or
fitness or suitability for any purpose and assumes no liability or responsibility for the accuracy, completeness, or usefulness of any
information. This information should not be relied upon to create specifications, designs, or installation guidelines. The persons
responsible for the use and handling of the product are responsible for ensuring the design, fabrication, or installation methods and
process present no health or safety hazards. Do not attempt to perform specification, design, fabrication, or installation work without
proper training or without the proper personal protection equipment. Nothing herein is to be taken as a license to operate under or a
recommendation to infringe any patents. Neosen shall have no liability for the use of or results obtained from such information,
whether or not based on Neosen’s negligence. Neosen shall not be liable for (i) any damages, including claims relating to the
specification, design, fabrication, installation, or combination of this product with any other product(s), an (ii) special, direct,
indirect or consequential damages. Neosen reserves the right to make changes to this information and to this disclaimer. Neosen
encourages you to review this information and this disclaimer periodically for any updates or changes. Your continued access or use
of this information shall be deemed your acceptance of this disclaimer and any changes and the reasonableness of these standards
for notice of changes.
Off
No power/inactive
Power On
One green flash
Charging
Continuous flashing green
End-of-charge
Solid green
Foreign object detected
Flashing red
Error condition
Solid red