User Guide
8233D PRO-EN
13
and input socket.
③Use the test pen on both ends of the other measuring capacitance of the
capacitor under test value and measured value read from the LCD display.
④When the meter measuring large capacitance, it takes time to stable reading.
6. Maintenance
6-1. Replacing the battery
When meter display the battery must be replace to maintain
normal operation.
① Disconnect and remove all test probes from any live source and
meter.
② Open the battery cover on the bottom case by screwdriver.
③ Remove old battery and snap new one into battery holder
6-2. Fuse replacement
Replacing the defective fuse should the done according to the following
procedure.
① To avoid electrical shock, remove the test lead and any input signal
before opening the bottom case.
② Open the botton case and then remove the defective fuse and insert a
new fuse of the same size and rating.
③ Replace the bottom case and reinstall all the screw.
6-3.Cleaning and Decontamination
The meter can be cleaned with soft clean cloth to remove any oil, grease or
grim. Do not use liquid solvent or detergent.
Caution