User Manual

9999counts Handheld multimeter
12/15
2-3-8.Capacitance(C)
Overload protection: 550V DC or AC peak
1. Insert the black test pen leads into the "COM" socket while the red test pen leads into the "V /Ω/ Hz" jack;
2.Rotate the dial to the“ ”position, trigger the "SELECT" key, and select the capacitance profile for automatic measurement.
3.Then connect the test leads across the measured capacitance.
Note:
1) When measuring the capacitance with 10nF range, there may be residual reading on the screen display value. Which is the distributed capacitance
of the test pen. For an accurate reading, which can be subtracted after measurement.
2)When large capacitance stalls is measuring serious leakage or breakdown capacitor, it will show some unstable values; it is normal that be
measuring large capacitors, the reading takes a few seconds to stabilize.
3) Please test the capacitor capacity before the capacitor should be fully discharged to prevent damage to the fuse and instrumentation.
4) Unit: l F = 1000mF lm F = 1000uF l u F = 1000nF l n F = 1000PF
Accuracy
Range
9999counts
Resolution
100nF
±（3.5%+20）
10pF
1000nF
100pF
10uF
1nF
100uF
10nF
1000uF
100nF
10mF
±（5%+3）
11uF
100mF
10uF