User's Manual

N75-A
User Manual
Copyright © Neoway Technology Co., Ltd
3
4 Electric Feature and Reliability
This chapter describes the electric features and reliability of N75-A, including current and voltage of
each power pin, operating and storage temperature ranges, and ESD protection features.
4.1 Electric Features
Table 4-1 Electric features
Parameter
Minimum Value
Typical Value
Maximum Value
VBAT
V
in
3.3V
3.8V
4.3V
I
in
/
/
2A
⚫ If the voltage is lower than threshold, the module might fail to start. If the voltage is higher than
threshold or there is a voltage burst during the startup, the module might be damaged permanently.
⚫ If you use LDO or DC-DC to supply power for the module, ensure that it outputs at least 2 A current.
When the module works at maximum power in GSM mode, the peak current might reach 2A. Add a
large capacitor to the VBAT pin to enhance the capability to output continuous current and avoid
voltage drop.
4.2 Temperature Features
Table 4-2 Temperature features
Status
Minimum Value
Typical Value
Maximum Value
Operating
-35°C
25°C
75°C
Extended
-40°C
85°C
Storage temperature
-45°C
90°C
If the module works in an environment of -35°C to -40°C or 75°C to 85°C, RF performance might be
worse. This does not affect the running of the module. The RF performance will meet the 3GPP standard
after the temperature reaches the operating range.