User Manual

Using the Nomad Handheld
N_SIGHT R900 User’s Manual for the Neptune Handheld System 4-27
Changing the Reading Entry Direction
As you enter a reading in the handheld, each number can be displayed
from right to left or from left to right.
2In the Read Dir field, touch th
e down arrow and do one of the
following:
• Select LEFT TO RIGHT if you
want the number to begin
from the left.
• Select RIGHT TO LEFT if you want
the number to begin
from the right.
These setting toggle between Left to Right or Right to Left
according to the current setting.
Changing the Route Read Direction
The handheld typically displays meters of a route from the first meter to
the last meter. However, you can change the order that meters are
displayed so that they are shown from the last meter to the first meter.
3In the Ro
ute Dir field,
touch the down arrow and do one of the fol-
lowing:
• Select FORWARD if you want the readings to advance
to the
next unread account in the route.
• Select BACKWARD if
you want to change the directions of
the readings to go backward to the previous unread account in
the route.
These settings toggles between Forward or Backward according to
the current setting.
Turning Key Clicks On and Off
The Key Clicks feature allows you to control how the handheld
responds when you press a key. When this feature is ON, the handheld
beeps whenever you press a key. Turning the Key Clicks feature on can
This procedure affects only accounts whose directions have not been set by
the host computer. If the reading-entry direction of an account has been set
by the host computer, the host setting replaces your setting.
Pilot Release