User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Setting Up the R900 Belt Clip Receiver
5-12 N_SIGHT R900 User’s Manual for the Neptune Handheld System
The following information appears on this screen.
RF Performance Modes
This Mode can be changed from the R900 BCR Status screen. The unit
has three options for the RF performance during a reading:
Connection Displays the type of connection used to pair
the R900 BCR, such as Bluetooth
Device Displays the name of the R900 BCR
Temperature Displays the temperature of the R900 BCR,
such
as normal.
SD MEM Free Displays the amount
of available memory
for the SD card.
Date Displays the date and time as follows:
• Date: MM/DD/YYYY
• Time: HH:MM
Firmware Displays the version of the firmware on the
R900 BCR
Battery Displays the available battery percentages
RF Mode Allows you to change the reading mode for
the R900 BCR by clicking the drop-down
selection list.
• Efficiency –reduced RF performance
and best battery life
• Moderate – default RF performance
• Perfo
r
mance – best RF performance
and decreas
ed battery life
1 Efficiency Reduces RF pe
rformance* and best battery
life
2 Moderate Default RF performance*
2 Performa
nce Best RF performance* and decreased
battery life
*RF performance refers specifically to the throughput of the receiver
which can impact the speed with which readings are processed in
high density areas. Range is not impacted by these modes.
Pilot Release