User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Troubleshooting
N_SIGHT R900 User’s Manual for the Neptune Handheld System 10-11
A warning message
appears as illustrated in
Figure 10.7.
4 Touch
YES to proceed.
Figure 10.7 Reboot Handheld Screen
A beep sounds and the N_SIGHT R900 Login screen appears as
illustrated in Figure 10.1 on Page 10-7.
Rebooting When Logged off N_SIGHT R900
Follow these steps to reboot the CE5320B when logged off N_SIGHT
R900.
1 From the N_SIGHT R900 Login screen, touch Menu or
press M.
See Figure 10.1 on Page 10-7.
2 T
he N_SIGHT R900 Main Menu appears as illustrated in Figure
10.2 on Page 10-8.
3 Touch
SIX for HANDHELD.
4 Touch
FOUR for REBOOT.
A beep sounds and the N_SIGHT R900 Login screen appears as
illustrated in Figure 10.1 on Page 10-7.
Pilot Release