User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Appendix B: Tokens List for Custom Format Screen
B-2 N_SIGHT R900 User’s Manual for the Neptune Handheld System
USR USR User characters (USR1, USR2, USR3)
CR Carriage returns (0x0D)
LF Line Feed (0x0A)
SP Space Character (0x20)
MID Meter ID (0x4E ('N')
FT Flow Token (0xA0)
NIDS Network ID Size (Two nibbles of values 00 to 99 that
provide network number)
NN Network Number (Net ID constant. Upper digit of
network ID sent to reading equipment, Net ID constant.
Lower digit of network ID sent to reading equipment.
Primary register usually has size of network in these
digits)
MR Mode Flag
RF Read Flag (dial code)
CKST Check sum token (0xFC
)
FC Format Constant (0x31 '1'))
MT Meter type (0x57)
Printable
character
Any printable ASCII value can be entered in the
character box
and it can be added to the list
Table B.1
Custom Format Tokens
Token Explanation
Pilot Release