User Manual

Introduction
1-8 N_SIGHT R900 User’s Manual for the Neptune Handheld System
Meter Readers
If this is the first time that you have used the handheld, read one of the
following chapters to get a general understanding of how the display
and keys work.
You will probably find the following chapters of the manual most
usefu
l.
• Chapter 2, "Overview of
the Neptune Handheld System" describes
the basic features and functions of the handhelds; introduces you to
the No
mad handheld
computer; how the handheld is incorporated
into the Neptune handheld system host software; and how it is used
by both meter readers and operators.
• Chapter 3, "Using the CE5320 Handheld" provides help to set up
and get started with your CE5320 handheld so that you can begin
coll
ecting information from the field and exchanging information
with the hos
t computer.
• Chapter 4, "Using the Nomad Handheld" provides help to set up
and get started with your Nomad handheld so that you can begin
coll
ecting information from the field and exchanging information
with the hos
t computer.
• Chapter 5, "Setting Up the R900 Belt Clip Receiver" provides basic
instructions for unpacking and inspecting the Belt Clip. It also gives
inst
ructions for sett
ing it up and becoming familiar with the display,
pairing it with the handheld, and usage.
• Chapter 6, "Gathering Route Data" provides instructions for using
the handheld device to collect meter readings and route data.
• Chapter 7, "Communicating with the Host Co
mputer" provides
procedures for exchangin
g information w
ith the host computer and
exiting the software.
• Chapter 8, "Using the Field Programmer" provides fundamental
instructions for operating the Field Programmer including how to
conn
ect the mouse, programming
the device, and operating the
Field Programmer.
Pilot Release