User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Overview of the Neptune Handheld System
N_SIGHT R900 User’s Manual for the Neptune Handheld System 2-5
• Ethernet Communication Port—an RJ-45 Ethernet connector on
the cradle allows you to connect the CE5320 using an RJ-45
Ethernet cable to a variety of devices. This capability provides for
route assignments and route data to be sent to the CE5320, and
meter readings and route information to be retrieved from it.
• Battery S
tatus Light—lets you
know when the battery is fully
charged. If the light is red, the battery needs recharging and if the
light is green, the battery is charged and the handheld is operational.
Do not attempt to remove the back panel of the CE5320. Attempting to
repair the unit on your own voids the warranty by breaking the warranty
label which covers a screw on the back of the unit. If the CE5320 does
not function, contact a Neptune support technician for assistance. For
help in contacting Neptune, refer to the topic
“Contacting Customer
Support,” on page 1-5.
Pilot Release