User Manual
Table Of Contents
- 13-0249- Exhibit Cover.pdf
- UPDATED_Pilot Release_Handheld System 11 13.pdf
- Neptune Handheld System User’s Manual
- 1 Introduction
- 2 Overview of the Neptune Handheld System
- 3 Using the CE5320 Handheld
- 4 Using the Nomad Handheld
- 5 Setting Up the R900 Belt Clip Receiver
- R900 Belt Clip Receiver
- Nomad Handheld and R900 Belt Clip Receiver
- Unpacking and Inspecting Equipment
- Using the R900 Belt Clip Receiver
- Using the R900 Belt Clip Receiver to Read a Route
- Updating R900 Belt Clip Receiver Firmware
- 6 Gathering Route Data
- The Reading Entry Screen
- Manually Collecting Meter Readings
- Collecting RR Readings
- Working with Accounts
- Validating Readings
- Removing a Reading
- Clearing a Skip Code
- Clearing a Comment Code, Customer Note, or Trouble Code
- Adding a New Meter to a Route
- Correcting or Changing Meter Information
- Finding and Displaying Reading-Entry Screens
- Resequencing Routes
- 7 Communicating with the Host Computer
- 8 Using the Field Programmer
- Connecting the Mouse
- Starting Field Programmer
- Programming the ProRead
- Querying the ProRead
- Reading the ProRead Register
- Programming the R900G Endpoint
- Using Command Gas
- Reading the R900G Endpoint Register
- Networking Two Registers
- Managing Formats
- 9 Maintaining and Repairing the Neptune Handheld System
- 10 Troubleshooting
- Appendix A Changing Volume Settings
- Appendix B Tokens List for Custom Format Screen
- Appendix C Pressure Configuration Factor Indexes
- Glossary
- Index
Using the CE5320 Handheld
N_SIGHT R900 User’s Manual for the Neptune Handheld System 3-13
To help you perform handheld tasks, the keyboard is color coded. For
example, by using the
BLUE key in conjunction with keys that have
blue characters printed on them, you can enter a character, such as “?”
or “#”. Keys with
black numbers or letters are single-entry keys. To
enter the number or letter, simply press the key with the corresponding
number or letter. Keys that have information printed in white above
them allow you to enter or change specific information about a meter or
route.
Because the CE5320 automatically disables inappropriate keys, the type
of
task t
hat you can perform from the keyboard depends upon the type
of menu that is displayed.
Function Keys
The function keys on the CE5320 are the top row of yellow keys that are
labeled with an
F (for function) and a number. Function keys allow you
to perform special tasks quickly.
If the unit is powered off, pressing will power
it on and pressing
BLUE while the unit
is on, will turn it off. The Help feature is not yet
supported.
In addition, allows you to access the Main
Menu for N_SIGHT R900, where you can access
the functions av
ailable to you while using the
CE5320 handheld.
While reading a route,
pressing accesses the
previous incomplete reading.
F1
F1
F1
F1
F1
F2
F2
Pilot Release