User Manual
Table Of Contents
- 72129069 - Exhibit Cover
- CORRECTED R900 BCT3 User Manual PUBLICATION_UM R900 BCT 10.17
- R900® Belt Clip Transceiver Users’ Manual
- Setting Up the R900 Belt Clip Transceiver
- Introduction
- R900 Belt Clip Transceiver Overview
- Nomad Handheld and R900 BCT
- Unpacking and Inspecting Equipment
- R900 BCT Components
- Using the R900 BCT
- Accessing the R900 BCT Status Screen
- Using the R900 BCT to Read a Route
- Using the R900 BCT for Field Presentment and Field Service
- Updating R900 BCT Firmware
- How the Firmware Update Works
- Index
- Neptune Locations
Function LED Color Explanation
Reading Modes
Normal Green
NormalMode isused to connect through Bluetooth to a host
device. Selection between Route (filtered) and RF Test
(unfiltered) is made in the host device software.
To enter this mode from other modes.
1.
Press
MODE
until the Mode LED flashes
green.
2.
Press
ENT
, and the Mode LED turns
green.
Unattended Yellow
Unfiltered OperationsMode can operate using the battery
or when connected to vehicle power.
To enter this mode with battery power:
1.
Press
MODE
until the Mode LED is
yellow.
2.
Press
ENT
.
To enter from when connected to vehicle power:
1.
Press
MODE
until the Mode LED is
yellow.
Table 2 – R900BCT Modes
R900 Belt Clip Transceiver User's Manual 5
S
etting Up the R900BeltClipTransceiver