User Manual
Table Of Contents
- 72129069 - Exhibit Cover
- CORRECTED R900 BCT3 User Manual PUBLICATION_UM R900 BCT 10.17
- R900® Belt Clip Transceiver Users’ Manual
- Setting Up the R900 Belt Clip Transceiver
- Introduction
- R900 Belt Clip Transceiver Overview
- Nomad Handheld and R900 BCT
- Unpacking and Inspecting Equipment
- R900 BCT Components
- Using the R900 BCT
- Accessing the R900 BCT Status Screen
- Using the R900 BCT to Read a Route
- Using the R900 BCT for Field Presentment and Field Service
- Updating R900 BCT Firmware
- How the Firmware Update Works
- Index
- Neptune Locations
LED Indicates
Red, yellow, green or
OFF
Startup initialization when applying
power
OFF No battery inserted
Yellow Battery charging
Solid green Battery charged successfully
Red Error condition
Table 5 – R900BCT External Battery LEDs
Battery Disposal/Recycling
Battery disposal/recycling is handled through Call2Recycle
®
1-800-822-8837. Customers
are encouraged to contact Call2Recycle to find their nearest drop-off location for proper
disposal/recycling.
Pairing the Nomad to the R900BCT through the Bluetooth
Complete these steps only if you are pairing the Nomad to the R900BCT for the first time.
Pairing the Nomad
To pair the Nomad to the R900BCT, complete the following steps.
1. Power ON the R900BCT and set to Normal Node, if not already set. See
"Understanding the R900BCT Modes" on page4.
2.
On the Nomad, click .
3.
Click
5
– UTILS.
4.
Click
8
– Belt Clip Status.
The AMR Connection screen appears. The R900BCT is visible in the Broadcasting
Device drop-down selection list.
10 R900 Belt Clip Transceiver User's Manual
Setting Up the R900BeltClipTransceiver