User Manual
Table Of Contents
General Installation Guidelines
CMIU Installation and Maintenance Guide 7
Figure 5 Application of the Sealant
9 Snap the cover onto the encoder register. See Figure 6.
Figure 6 Covering the Terminal Screws
10 Run the cable to the MIU and fasten it securely.
Any leak point can cause a reading failure in a submerged meter setting.
• Do not exceed maximum cable lengths as defined in “Specifications -
CMIU” on page 2.
• If the encoder register is prewired and potted, use Scotchloks for con-
necting the register to the MIU.