User Manual

Select a location for the L900 MIU that meets the
recommendations in "Site Selection" on page14.
Installing the Antenna
Figure 13 – Inserting the Antenna
into the Pit Lid
1. Insert the antenna cable and housing through the 1¾-
inch hole in the meter pit lid. See Figure 13.
Figure 14 – Locking Nut on Antenna
2. Thread the locking nut onto the antenna (unthreaded
end towards lid). See Figure 14.
Figure 15 – Securing the Locking Nut
3. Hand tighten the nut securely to the lid. See Figure 15.
16 L900 MIU Pit Installation and Maintenance Guide
Chapter 4: Pit Installation