User's Manual

Pit Installation
14 R900 Wall and Pit MIU Installation and Maintenance Guide
Beginning the Installation
1 Select a location for the MIU that meets the recommendations
in
“Site Selection” on page 12.
2 Insert the antenna cable and housing through the 1 3/4” hole
in the meter pit lid. (
Figure 12.)
Figure 12 Inserting Antenna into the Pit Lid
3 Thread the locking nut onto the antenna (unthreaded end
towards lid) and hand-tighten.
Figure 13 Locking Nut on Antenna
4 Remove black plastic thread protector cap from the male “F”
connector on the MIU.
Figure 14 Black Thread Guard from Male F-Connector
-