User Manual

R900G Endpoint - Retrofit Installation
12 R900G Endpoint Installation and Maintenance Guide
4 Slide the cover over the R900G Endpoint housing.
5 Use the four mounting screws (supplied) to secure the
cover and the R900G Endpoint to the gas meter casing. (See
Figure 11.)
6 Install two tamper snap seals (supplied) into the recess in the
cover.
7 Seat firmly.
Figure 11 Using the Mounting Screws
Installing Sensus R200/275/315 with Dial or Odometer Index
R900G Model: 12821-000
The following figure illustrates the Sensus Model R200/275/315
with Dial or Odometer Index.
Figure 12 Sensus R200/275/315 with Dial or Odometer Index
The following steps are the same for installation of R900G Model: 12821-100
on Sensus model #415.