User manual

New Compilation
Nero Burning ROM 26
Browse
button
Opens the Open window where you can select an image file.
Boot Language
combo box
Selects the language that appears when the drive boots.
You can configure expert settings in the Advanced area. It may be necessary to make
changes for certain image files. Refer to the documentation for relevant information on the
boot image. We recommend that you only change the settings if you are familiar with
creating bootable discs and boot images. The following configuration options are available:
Enable expert features
check box
Enables the following configuration options.
Emulation Type
combo box
Selects an emulation type.
Start Message
text box
Defines the message that opens during booting.
Load segment of
sectors
text box
Defines where the boot image starts and how the sectors
behave after booting.
Number of loaded
sectors
text box
Defines how many sectors will be loaded.
6.2 Creating a New Compilation
To create a new compilation, proceed as follows.
1. Select the disc type you want from the drop-down menu in the New Compilation window.
The burner you have installed will determine which disc type (CD, DVD, HD DVD and/or
Blu-ray Disc) can be burned. If the burner can only burn CDs, the combo box is grayed
out. But with Nero Image Recorder which is installed in Nero Burning ROM you will always
be able to create an image (see
Image File) even if you have not installed a burner.
Æ The combo box shows the disc formats that can be burned using this disc type.
2. Select the disc format you want from the combo box.
Æ The tabs for this disc format are displayed.
Select the Copy CD and Copy DVD entries to go to the copy process (see
Copying).
3. Configure the options you want in the tabs (see New Compilation Window).
4. Click on the New button.
Î The New Compilation window is closed and the selection screen is opened. You have
successfully created a new compilation. Now you can add files to the compilation (see
File Selection).