User manual

File Selection
Nero Burning ROM 32
7.4 Audio Track Properties window
In the Audio Track Properties window you can view the properties of a selected audio file,
i.e. a track, in the compilation, change them if necessary, and edit the audio file. You can
open the window by marking the desired audio file (requirement: you are creating an Audio
CD) and by selecting the Edit > Properties menu.
Fig. 8: Audio Track Properties window
The window contains the following tabs:
Track Properties
Contains general options for configuring the audio file
(see
Track Properties Tab).
Indexes, Limits, Split
Contains options for splitting the audio file and for
setting indexes. You can also play back the audio file
(see
Indexes, Limits, Split Tab).
Filters
Contains different filters that can be applied to the audio
file. Different options are also available for configuring
each filter (see
Filters Tab).
The audio file is edited using a non-destructive procedure. In other words, the actual
recording is not changed, marks are simply set. The steps in the editing process can be
undone at any time and no additional audio data is generated. The audio file is not actually
changed until it is burned.