User manual

LabelFlash™
Nero Burning ROM 74
The screen offers the following setting options:
Inner radius
Defines the distance between the label and the inner edge.
Width
Defines the width of the print area.
Printing quality
Opens the LabelFlash™ Print Properties window.
This is where you can change the printing quality and the
contrast level and display the changes made directly in the
print preview.
Preview
Opens the Print Preview window that shows how the label
should appear on the LabelFlash™ disc.
Label templates
Contains a selection of different templates for designing the
label. You can continue to edit and customize a selected
template.
Burn
Starts the print process.
Cancel
Cancels the process and closes the window.
If you are creating a DiscT@2, Nero Burning ROM displays only the available print area for
creating the label by default, i.e. the area on the data side of your DVD that is not already
taken up by data. You cannot increase the radius of the print area.
15.2 Printing LabelFlash™ Labels and DiskT@2
Basically, it is irrelevant whether you print on the label or the data side when creating labels.
The label is actually printed outside the normal burn process.
You can print on the label side of the DVD at any time.
We recommend that you print on the data side first when you have burned the compilation.
It is not possible to burn data on a printed data side. When you insert a DVD on which data
has already been burned, Nero Burning ROM automatically identifies the space that is still
available on the data side and on which you can print.
To print a LabelFlash™ label on the front or a DiscT@2™ label on the flipside, proceed as
follows:
1. If you want to print a LabelFlash™ label on the label side, insert a blank LabelFlash™ disc
into the burner with the label side facing down.
Æ The Burn Label window is opened with the LabelFlash™ logo.
2. If you want to print a DiskT@2 on the data side, insert a blank LabelFlash™ disc with the
data side facing down into the burner.
Æ The Burn Label window is opened with the DiskT@2™ logo.
3. Create a label according to your requirements or open a label (File > Open menu) that you
have already created with Nero CoverDesigner.
The interface in the Burn Label window and the process for creating a label work on the
same principle as Nero CoverDesigner. Please see the Nero CoverDesigner user manual
for full instructions on how to make professional looking covers and labels.
4. If you want to change the area in which the label is printed, change the print area accordingly
using the text boxes Inner Radius and Width.
5. If you want to view or change the print properties:
1. Click on the Change button.