User manual

Data Disc

Nero Express

9. If you want to enhance the burning speed by limiting the data redundancy or to configure the

data redundancy:

1. Select the Data redundancy check box in the extended area of the screen..

 The option buttons are enabled.

2. Select the desired reliability level.

If the Data redundancy check box is cleared, the disc will be filled completely

with copies of the chosen data and checksums. A display panel in the compilation

screen indicates the current redundancy level.

10. Click the Next button.

 You have compiled a SecurDisc disc with settings according to your requirements

and can now burn the disc.

5.3 Saving Data Track

With Nero Express you can save a data disc as an image file. The image file can later be

burned to a recordable disc. The result is a copy of the original data disc.

To save the data disc as an image file, proceed as follows:

1. Insert the data disc in a drive.

2. Click the Save Data Tracks button in the extended area of the start screen.

 The Select Track window is opened. The tracklist shows you the sessions and data

tracks that are found on the disc. Due to the technical reasons, only the first data track of

the first session can be saved.

Select Track