User manual

LightScribe

Nero Express

The interface in the

Disc Label

screen works on the same principle as Nero

CoverDesigner. Basically, it is irrelevant whether you print the label on paper or

directly onto an appropriate disc.

Please see the separate Nero CoverDesigner user manual for full instructions on

how to make professional looking covers and labels.

6. Click the Next button.

 The LightScribe Print Properties screen is displayed.

7. Add to the required values in the input fields and enable the option button for the desired

print quality.

8. Click the Print button.

 The printing process begins. You can follow the process status in the status bar. As

soon as printing is finished, the Nero – LightScribe dialog appears and displays a

message about the result of the printing process.

9. Click the OK button.

10. Click the Next button in the LightScribe Print Properties screen.

 You have successfully created and printed a LightScribe label according to your

requirements and can now continue by selecting another option from the final screen

or by exiting Nero Express.

It is possible to burn the label several times to the same LightScribe disc. The

printed labels will be aligned. This darkens the label and often improves the quality.

It is also possible to extend the label with new elements in an additional burn

process. Note to save the created label if you want to use it once again.

Burning LightScribe label Within the Compilation

To integrate the creating and burning of a LightScribel label in your compilation

project, enable the Always print LightScribe label check box in the Options.

The Disc Label screen will then be displayed after you have compiled your

project (as long as the LightScribe recorder is selected). The label print process

will be executed after burning of the data side.