User manual

Labelflash
Nero Express
50
Button
Burn
Starts the burn process.
Button
Cancel
Cancels the procedure and closes the window.
If you are creating a DiscT@2, Nero Express displays only the available print area
for creating the label by default, i.e. the area on the data side of your DVD that is
not already taken up by data. You cannot increase the radius of the print area.
9.2 Printing Labelflash Labels and DiskT@2
Basically, it is irrelevant whether you print on the label or the data side when creating labels.
The label is actually printed outside the normal burn process.
You can print on the label side of the DVD at any time.
We recommend that you print on the data side first when you have burned the
compilation. It is not possible to burn data on a printed data side. When you insert
a DVD on which data has already been burned, Nero Express automatically
identifies the space that is still available on the data side and on which you can
print.
To print a Labelflash label on the label side or a DiskT@2 on the data side of your DVD,
proceed as follows:
1. If you want to print a Labelflash label on the label side, insert a blank Labelflash disc into the
recorder with the label side facing down.
 The Burn Label window is opened with the Labelflash logo.
2. If you want to print a DiskT@2 on the data side, insert a blank Labelflash disc with the data
side facing down in the recorder.
 The Burn Label window is opened with the DiskT@2 logo.
3. Create a label according to your requirements or open a label that you have already created
with Nero CoverDesigner.
The interface in the Burn Label window and creation of a label work on the same
principle as Nero CoverDesigner. See the separate Nero CoverDesigner manual
for full instructions on how to create professional looking covers and labels.
4. If you want to change the area in which the label is printed, change the print area
accordingly using the input fields Inner Radius and Width.
5. If you want to view or change the print properties: