User manual

Copying a Disc
Nero Express
61
11.3 Copy Settings
Source and Destination screen
The following configuration options are available in the Source and destination screen:
Selection list
Source drive
Defines the drive from which the source information is read.
Insert the disc that you want to copy into the drive.
Selection list
Destination drive
Defines the destination drive.
Insert a blank disc into this drive.
Button
Info
Opens the Recorder Information window.
This contains information on the selected destination drive.
Check box
Quick copy
Enables direct copying from the source to the destination
drive. Data is not buffered on the hard drive during this pro-
cess.
The option On-the-fly
is only available if there are at least two
drives connected (does not apply for Nero Image Recorder). If
this check box is not selected, an image file will be created
first, which is then burned.
Selection list
Write speed
Defines the speed at which the disc is burned. Only the burn
speeds that are supported by the selected recorder are dis-
played.
Not available for Nero Image Recorder.